Analog and Other I/O

VME-to-VME bus adapter with DMA and fiber-optic interface

VME repeater with 6U-9U holder.

PCI to VME bus adapter with DMA and fiber-optic interface. Supports 3.3V and 5.0V signalling.

The VME64 to VME64 bus adapter directly connects two buses. The virtual bus created allows the two systems to operate as one, enabling seamless operation and superior performance. Supports Controller Mode DMA transfer rates of 70 MB/s. 2usec latency.

The VME64 to PCI bus adapter directly connects two buses. The virtual bus created allows the two systems to operate as one, enabling seamless operation and superior performance. Supports Controller Mode DMA transfer rates of 70 MB/s. 2usec latency.

The VME64 to PMC bus adapter directly connects two buses. The virtual bus created allows the two systems to operate as one, enabling seamless operation and superior performance. Supports Controller Mode DMA transfer rates of 70 MB/s. 2usec latency.

This VME64 to CPCI bus adapter directly connects two buses. The virtual bus created allows the two systems to operate as one, enabling seamless operation and superior performance. Supports Controller Mode DMA transfer rates of 70 MB/s. 2usec latency.

Dual 64-pin Transition Panel Converts two 64-pin DIN connectors to lift clamp terminal block

ACC-BT03 Dual 96-pin Transition Panel with Bussed Ground

Rear-panel transition board for CPCI-100A

Dual PMC carrier card for 6U CompactPCI; 32-bit/33 MHz.

CPCI-200A-BP is a 4-slot IP carrier for 6U CPCI systems; rear I/O.

Single-wide IndustryPack with 16 inputs multiplexed to a 16-bit ADC, 100 kHz

Single-wide IndustryPack providing an IEEE-488 instrumentation support interface

Single-wide IndustryPack with 8 channels of simultaneously converting 16-bit ADC, 40 kHz.

IP-ALTERA-HD50 is a single wide programmable IndustryPack with 28 line of digital I/O, high-density cable and IP-TERM-HD50.

IP-ALTERA-TTL is a single-wide IndustryPack with TTL I/O.

IndustryPack (IP) with ARINC 429 avionics interface and extended operating temperature; 8 RX and 4 TX channels

Single-wide IndustryPack with 3 serial channels, 25 MHz MC68302, 256 KB SRAM

Single-wide IndustryPack with 6 channels of DAC

IndustryPack with 48 TTL level tristate digital I/O lines with pullups, interrupts, debounce and ESD.

IP-DUALPIT2 is a drop in replacement for the IP-DUAL-PIT. It is a single-wide IndustryPack that implements high-density I/O and offers a wide range of interface options.

Extended CAN bus controller IndustryPack

IndustryPack with 4 MB Flash EPROM

IndustryPack with 16 channels, 12-bit, up to 800 kHz ADC.

IndustryPack (IP) 2 channels of high speed multiprotocol serial, EIA-423

The IP-OCTAL-232 IndustryPack implements eight EIA-232 asynchronous serial ports, each with RXD, TXD, RTS, and CTS signals.

IndustryPack with 8 EIA-485 asynchronous serial ports

IP-OCTALPLUS485 provides eight channels of high-performance EIA-485 serial communications.

IndustryPack providing 8 channels of RS-232 115 kbaud serial interface with FIFOs, ESD protection and extended temperature range.

IndustryPack with 8 channels of TTL level signals and extended temperature range.

IndustryPack with 16 opto-isolated, multiplexed 16-bit ADC channels with gain control 80 kHz, and extended temperature range.

IndustryPack with 8 optically isolated (opto-isolated), 12-bit DAC channels with gain control 70 kHz and extended temperature range.

IndustryPack providing opto-isolated 12-bit, 16 channel multiplexed ADC, 8 channels DAC, 80 kHz and extended temperature range.

IndustryPack with 16 interrupt generating, optically isolated digital inputs and commercial temperature range.

IndustryPack with 16 optically isolated digital outputs; 24V DC.

Single-wide IndustryPack with 3 Pulse Width Input channels

Single-wide IndustryPack with 8 form C latching relays.

Single-wide IndustryPack with 2 stepper motor channels

The IP-UD-D differential digital I/O IndustryPack provides 24 flexible I/O signal lines with differential output drivers and differential inputs.

IP-UD-E-48 is a single-wide IndustryPack that provides 48 flexible I/O lines with TTL-level inputs and outputs.

IP-UD-I is a single-wide IndustryPack that provides 24 buffered TTL digital I/O lines with high current output drivers and wide voltage range inputs.

The IP-UD-IE digital I/O IndustryPack has 24 flexible TTL-level input/output lines.

The IP-UD-IHV-16I8O IndustryPack provides high voltage, 16 inputs, 8 outputs, and interrupts.

IndustryPack with 2 independent serial channel

Mezzanine carrier card for 3U CompactPCI systems. Holds 3 PC-MIP modules.

MC-804 accommodates four PC-MIP modules, delivers four functions, 200 I/O lines, and a broad range of I/O solutions in a full-length PCI slot.

P0CC1 is a 6U VME PMC carrier that can accommodate two PMCs in a standard VME environment.

The PCI-40B IndustryPack carrier board provides four IndustryPack slots on a single desktop or industrial PC slot card. The IP bus clock is software selectable between 8 MHz and 32 MHz on a per slot basis.

PEX441 - Rugged, COTS 6U dual XMC VITA 46 Carrier Card designed to support high power mezzanine cards in both air cooled and conduction cooled systems.

PMC with 32 multiplexed 16-bit ADC, selectable gain, 80 kHz, extended temperature, and rear I/O.

VME motherboards offer limited PMC slots for further I/O modules; therefore, we offer a line of expansion cards to enable two to three PMC modules per slot for 6U VME applications.

The PP-600 PIM carrier provides flexible access to 128 lines of rear I/O for 6U CompactPCI (CPCI) carrier cards. PP-600 contains no active components.

TM-680 is a transisition module providing flexible access for up to 300 lines of rear-panel I/O for 6U CPCI PC-MIP carriers. This transition module has no active components. It is compatible with the MC-607 carrier.

TM-683 is a transition module providing flexible access for the 128 lines of rear-panel I/O for our 6U CompactPCI carrier cards.

6U VME carrier card with four IP slots and extended temperature range.

A four slot IndustryPack carrier designed for use in VME64x chassi

VME-3119 16-bit Scanning Analog Input Board with Programmable ain, Filter Cutoff, and Autocalibration Per Channel

VME-3122A High-Performance 16-bit Analog-to-Digital Converter (ADC)

VME-3125 Isolated Scanning 12-bit 32-Channel Analog-to-Digital Converter Board (6U) with Built-in-Test

VME-3413 is a 32-Channel signal conditioning board.

VME-4116 8-Channel 16-bit Resolution Analog Output Board

VME-4140 32-Channel 12-bit Analog Output Board

VME-4150 Isolated 12- Channel 12-bit Analog Output Board with Voltage or Current Output

VME-4900 Dual-Channel Digital-to-Synchro/Resolver Converter Board

VME-4911 Quad-Channel Multiplexed Synchro/Resolver-to-Digital Converter Board

Intelligent I/O Controller

IVMIVME-REPEAT L is a two-board set which allows VMEbus slave I/O boards residing in one VMEbus chassis to be controlled by a VMEbus master residing in another chassis.

ACC-BT12 D-Subminiature Adapter Shell for 9-,15-, and 25-pin Connector

The XM-1553 is a passive transition module for IP-1553 IndustryPacks.

6U Transition module for RS-232, RS-422, RS-485 IP-CM302 and IP-COMM360 IndustryPacks

XM-664-60 provides rear panel I/O access to the VIPC664 IndustryPack carrier via the VME64 backplane. The transition module features a mating 5-row DIN Harting P2 connector, a 7-row 2 mm Hard Metric P0 connector, and 6U height. 60 mm deep and provides fou

XM-OCTAL is a transition module for IP-OCTAL IndustryPacks. Supports two OCTAL serial modules.

Octal serial 6U mounting transition module with RJ45 connectors for IP-OCTALPLUSxxx, IP-OCTALPLUS485, IP-OCTAL, and IP-OCTPLxxx-ET IndustryPacks.