Abaco’s wide range of carrier cards allows you to expand your system’s capabilities simply and cost-effectively, allowing easier technology insertion.
Current Products
| Product Name | Short Description | Form Factor | Capacity | |
|---|---|---|---|---|
 |
CPCI-100A-BP |
CPCI-100A-BP is a 2-slot IP carrier for 3U CPCI systems; rear I/O. |
cPCI 3U | 2 IP |
 |
CPMC1 Carrier Card |
CPMC1 mechanical adapter 3U CompactPCI with one PMC site. CPMC, pmc, carrier |
cPCI 3U | 1 PMC |
 |
EXP238 |
EXP238 is a 6U VMEbus form factor expansion card offering three XMC/PMC expansion sites |
VME 6U | 3 PMC/XMC |
 |
PEX431 Multi-fabric Switch |
The PEX431 is a multi-fabric switch and XMC carrier card for building VPX systems. |
VPX 3U | 1 PMC/XMC |
 |
PEX442 Carrier Card |
PEX442 - 6U VPX Mezzanine Carrier Card with non-blocking Gen 2 PCI Express switch with four x4 ports to the backplane |
VPX 6U | 2 PMC/XMC, 1 AFIX |
 |
PMC238 Expansion Card |
VME motherboards offer limited PMC slots for additional I/O modules; therefore, we offer a line of expansion cards to enable two to three PMC modules per slot for 6U VME applications. |
VME 6U | 3 PMC |
|
|
PMC238 Expansion Card |
VME motherboards offer limited PMC slots for additional I/O modules; therefore, we offer a line of expansion cards to enable two to three PMC modules per slot for 6U VME applications. |
VME 6U | 3 PMC |
 |
PMC239/F |
PMC239/F PCI to PMC Adapter with fan |
PCI |
CARRIER CARDS AND BUS ADAPTERS products that are No Longer Recomended or Discontinued see below.
No Longer Recommended
| Product Name | Body |
|---|---|
| IMPCC1 |
IMPCC1 is a 3U CPCI single PMC carrier card for use with IMP1A. Available in air- and conduction-cooled formats, and with either front or rear I/O. |
Discontinued Products
| Product Name | Body |
|---|---|
| 412-1 |
VME-to-VME bus adapter with copper cable interface |
| 620-3 |
PCI to VME bus adapter with DMA and fiber-optic interface. Supports 3.3V and 5.0V signalling. |
| 800 |
The VME64 to VME64 bus adapter directly connects two buses. The virtual bus created allows the two systems to operate as one, enabling seamless operation and superior performance. Supports Controller Mode DMA transfer rates of 70 MB/s. 2usec latency. |
| 810 |
The VME64 to PCI bus adapter directly connects two buses. The virtual bus created allows the two systems to operate as one, enabling seamless operation and superior performance. Supports Controller Mode DMA transfer rates of 70 MB/s. 2usec latency. |
| 820 |
The VME64 to PMC bus adapter directly connects two buses. The virtual bus created allows the two systems to operate as one, enabling seamless operation and superior performance. Supports Controller Mode DMA transfer rates of 70 MB/s. 2usec latency. |
| DCPMC64 |
Rugged dual CompactPCI 64-bit PMC carrier module in 6U form factor |
| DCPMC64 |
Rugged dual CompactPCI 64-bit PMC carrier module in 6U form factor |
| P0CC1 |
P0CC1 is a 6U VME PMC carrier that can accommodate two PMCs in a standard VME environment. |
| PCI-40B |
The PCI-40B IndustryPack carrier board provides four IndustryPack slots on a single desktop or industrial PC slot card. The IP bus clock is software selectable between 8 MHz and 32 MHz on a per slot basis. |
| PEX430 |
PEX430 is a PCI Express switch and PMC/XMC carrier card for building VPX systems. |
| PEX440 |
PEX440 - 6U VPX Mezzanine Carrier Card with non-blocking Gen 2 PCI Express switch with four x4 ports to the backplane |
| SPR418A |
SPR418 - PMC/XMC hybrid carrier card for PCI Express slots in high performance servers & small form factor PC's needing PCIe compatibility and/or a short form factor carrier card. |
| VIPC626-ET |
Carrier Card for 6U VMEbus. Provides 4 IndustryPack slots and supports extended temperature range. |
| VIPC628-ET |
6U VME carrier card with 4 IndustryPack slots, shielded front panel connectors, and extended temperature range. |
| VIPC664-ET |
A four slot IndustryPack carrier designed for use in VME64x chassi |
| XM-664-60 |
XM-664-60 provides rear panel I/O access to the VIPC664 IndustryPack carrier via the VME64 backplane. The transition module features a mating 5-row DIN Harting P2 connector, a 7-row 2 mm Hard Metric P0 connector, and 6U height. 60 mm deep and provides fou |