To monitor an existing HST26A resolver and AstroSystems MBII encoder system using a VMIVME 4911 Synchro/Resolver to...
Connecting an external reference voltage to P2 pin A1 of VME 2120-175 Digital Output board. In order to protect this...
Share
DescriptionIf VMIVME-9081 IIOC is used in "Ethernet host interface" mode, it is possible to corrupt the VxWorks bootline...
Share
VMIVME-2120 Product Manual 500-002120-000 Rev AE Page 36 Figure 2-4S1 DIP SW positions labeled as 4,5,6,7,8 are...
Share
Outputs of VMIVME-012120-175 board always turned on and no data written to the boards registers. The load is an LED...
Share
Intermittent errors on VMIVME-3113A channel zero when using an IIOC 90xx system.If you are using the 3113A in...
Share
VMIVME-1111 64Bit High-Voltage Digital Input Board Questions regarding input signal configuration as documented in the...
Share
Delete the INF file installed by Windows during setup: This file may be located in different places and have different...
Share
These instructions are to be used ONLY if removing a device from the Add/Remove Programs Control Panel fails for some...
Share
Run Test Config from the CEI-SW program group. This will launch a p-console application, which performs an internal wrap...